Thursday, October 17, 2013

How to Whitewash a Barn Door

Remember the barn style sliding door Jesse made and hung a few weeks ago? I was trying to decide if I wanted to paint or stain the door when a friend suggested I try white-washing it. After five minutes of google searching "how to make whitewash," I settled on a recipe that called for two parts white latex paint and one part water. Just paint and water? No problem! I had left over paint! Free is the best kind of project! Our weekend was pretty much booked with plans so I woke up really early on Saturday to start the door. 

First, I emptied and cleaned a coffee can to use for mixing the whitewash. I just eyeballed the mixture by pouring in paint and then adding half the amount of water.

During my quick research, I read that whitewash should be applied and then some should be removed with a soft cloth. I tried a cut up t-shirt first, but that left a gray lint in the paint so I switched to a cloth diaper and that worked perfectly.

I also read that the whitewash dries quickly and was advised to work in sections. After the first coat, I realized that wasn't the case for my latex and water mix. For the second and third coats I whitewashed the entire door, let it dry for about five minutes and then wiped it with the cloth.After the wash had dried completely, I used sandpaper to rough up the door and give it a more worn in look.

Then I came back and dry brushed a little more on the spots that were too dark.

Ta-da! Can you believe that cool door cost less than fifty bucks!? Still lots to do in the dining area, but it feels really good to cross something off the list.

No comments:

Post a Comment